MARCH 2012
Regular Duty Labels
These labels are intended for interior use.
| Face Stock: | 4 mil white vinyl (high tack perm) 50# |
| Adhesive: | I406-K, Permanent Adhesive |
| Laminate: | 1 mil clear Polyprolene Laminate |
| Ink: | UV resistant inks |
| Temperature Service Range: | ( – ) 65 to ( + ) 200 degree |
| Temperature Application: | ( + ) 35 degree |
| Surfaces: | High adhesion to most difficult substrates, especially plastics. |
Severe Duty Labels
These labels are intended for interior use.
| Face Stock: | 4 mil white vinyl (high tack perm) 50 |
| Adhesive: | I406-K, Permanent Adhesive |
| Laminate: | 1.42 clear UV resistant Polyester Laminate |
| Ink: | UV resistant inks |
| Temperature Service Range: | ( – ) 40 to ( + ) 200 degree |
| Temperature Application: | ( + ) 50 degree |
| Surfaces: | Heat resistance, dimensional stability, outdoor use, weather resistance.Adheres to Stainless Steel, Aluminum, Painted surfaces. |
Application Instructions
Proper procedures should be used in applying these or any other labels.
- Insure that the surface is cleaned and free of dirt, dust, grease, and moisture.
- If the surface is painted, insure that the paint is dry.
- Surface temperature above 40 degrees F.
- Press the label on after applying it to the surface. One or more passes over the label with a sponge or rubber roller will insure that the glue is in good contact with the majority of the surface to which it is expected to adhere
